Click Arc
ARC Flash Compliant Garments
Electric arc flash is one of the least understood hazards of electricity. It's prevalent in most Industries, with around 1,000 electrical accidents at work each year, and as many as 251 people dying from their injuries. That's why, at Beeswift, we have developed the Click ARC range of workwear, with varying layering options to meet your ARC FLASH demands.
ARC Symbols and EN Standards IEC/EN 61482 SERIES
IEC EN 61482-1-1: 2009 This incorporates the "open arc" test method which is used in the US, and it measures the Arc Thermal Performance Value (ATPV) of the fabric in cal/cm². The end user can select the correct clothing systems by ensuring the ATP value of the fabric is greater than the incident heat energy of the arc.
IEC EN 61482-1-2: 2007 The "box arc" test method is based on the European method described in ENV 50354, with a heat transfer measurement. Materials are classified as Class 1 (4kA) or Class 2 (7kA).
IEC 61482-2: 2009 Performance requirements for materials, and design requirements for garments.
• Fire Retardant, Hi Vis, Anti-static, ARC Flash Orange Coverall
• RIS-3279-TOM issue 1 for use on or around railway lines
• 300gsm 60% Modacrylic ,40% Cotton
• 2 hip pockets
• Large bellows pocket to each leg with hook and loop closure flap
• Right leg mobile phone pocket with hook and loop closure flap
• All pocket flaps with Retro-reflective tape feature.
• Internal knee pad pouches
• Large qualifying icons on left leg pocket
• Mandarin collar
• EN ISO 13688:2013 - General requirements for protective clothing
• EN ISO 20471:2013 Class 3 - Test method for high visibility – RIS-3279-TOM Issue 1
• EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
• EN 1149-5:2008 - Anti Static - Material performance and design requirements
• EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
• EN ISO 11612:2015 (A1 A2 B1 C1) - Protection against heat and flame
ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (EBT50 = 9.3 Cal/cm2) - Open Arc testing
• Each garment style is independently tested to both box and open ARC standards.
• Click ARC production is covered by article 11B certification.
• Fire Retardant, Hi Vis, Anti-static, ARC Flash Orange Coverall.
• GO/RT 3279 issue 8 2013 for use on or around railway lines.
• 310gsm 40% Modacrylic 24% Viscose, 20% Polyester, 10% Cotton, 4% Aramid, 2% Anti-static Fibre.
• 2 hip pockets.
• Large bellows pocket to each leg with hook and loop closure flap.
• Right leg mobile phone pocket with hook and loop closure flap.
• All pocket flaps with Retro-reflective tape feature.
• Internal knee pad pouches.
• Large qualifying icons on left leg pocket.
• Adjustable leg bellows.
• EN ISO 13688:2013 - General requirements for protective clothing
• EN ISO 20471:2013 Class 3 - Test method for high visibility - GORT 3279 Issue 8
• EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
• EN 1149-5:2008 - Anti Static - Material performance and design requirements
• EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
• EN ISO 11612:2015 (A1 A2 B1 C1) - Protection against heat and flame
ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (ATPV = 16 Cal/cm2) - Open Arc testing
• Each garment style is independantly tested to both box and open ARC standards.
• Click ARC production is covered by article 11B certification.
• Fire retardant, Anti-static, ARC Flash coverall.
• 300gsm 60/40 Modacrylic/cotton blend.
• Triple stitch construction.
• 2 hip pockets.
• Rear patch pocket with hook and loop closure flap.
• Large bellows pocket to each leg with hook and loop closure flap.
• Right leg mobile phone pocket with hook and loop closure flap.
• All pocket flaps with Retro-reflective tape feature.
• Internal knee pad pouches.
• Large qualifying icons on left leg pocket.
EN ISO 13688:2013 - General requirements for protective clothing
EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
EN 1149-5:2008 - Anti Static - Material performance and design requirements
EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
EN ISO 11612:2015 (A1 A2 B1 C1) - Protection against heat and flame
ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (ATPV = 10.8 Cal/cm2) - Open Arc testing
• Each garment style is independently tested to both box and open ARC standards.
• Click ARC production is covered by article 11B certification.
• Does NOT conform to EN ISO 20471
• Fire Retardant, Hi Vis, Anti-static, ARC Flash coverall.
• 300gsm 60/40 Modacrylic/cotton blend.
• Inherently flame retardant.
• Fire Retardant properties will not diminish with repeated laundering.
• Triple stitch construction.
• 2 hip pockets.
• Large bellows pocket to each leg with hook and loop closure flap.
• Right leg mobile phone pocket with hook and loop closure flap.
• All pocket flaps with Retro-reflective tape feature.
• Internal knee pad pouches.
• Large qualifying icons on left leg pocket.
• EN ISO 13688:2013 - General requirements for protective clothing
• EN ISO 20471:2013 Class 3 - Test method for high visibility
• EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
• EN 1149-5:2008 - Anti Static - Material performance and design requirements
• EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
• EN ISO 11612:2015 (A1 A2 B1 C1) - Protection against heat and flame
ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (ATPV = 10.8 Cal/cm2) - Open Arc testing
• Each garment style is independently tested to both box and open ARC standards.
• Click ARC production is covered by article 11B certification.
• Fire Retardant, Hi Vis, Anti-static, ARC Flash coverall.
• 300gsm 60/40 Modacrylic/cotton blend.
• Inherently flame retardant.
• Fire Retardant properties will not diminish with repeated laundering.
• Triple stitch construction.
• 2 hip pockets.
• Large bellows pocket to each leg with hook and loop closure flap.
• Right leg mobile phone pocket with hook and loop closure flap.
• All pocket flaps with Retro-reflective tape feature.
• Internal knee pad pouches.
• Large qualifying icons on left leg pocket.
• EN ISO 13688:2013 - General requirements for protective clothing
• EN ISO 20471:2013 Class 3 - Test method for high visibility
• EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
• EN 1149-5:2008 - Anti Static - Material performance and design requirements
• EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
• EN ISO 11612:2015 (A1 A2 B1 C1) - Protection against heat and flame
ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (ATPV = 10.8 Cal/cm2) - Open Arc testing
• Each garment style is independently tested to both box and open ARC standards.
• Click ARC production is covered by article 11B certification.
-
5 Products
