© 2023 Beeswift Limited

Fall Arrest Lanyards

D-Ring tool attachment point
• Creates instant attachment points
• 0.9 kg (2 lb.) capacity
• 1.3 cm (0.5") D-Ring attachment point
• Use our Quick-Wrap Tape II to attach D-ring to your tool

3M™ DBI-SALA® Nano-Lok™ Personal Self Retracting Lifeline, 3101208 is made from 19 mm (3/4") Dyneema® fibre and polyester web. Our 1.8 m single-leg lifeline has an aluminium rebar hook end, a quick connector for harness mounting and a smart-activating brake system.

• Extremely compact and lightweight single-leg personal self-retracting lifeline designed for working at height
• Smart activating brake system provides fall clearance as low as 1.2 m (4 ft.) - up to 4 m (13 ft.) less than lanyards
• Lightweight speed connect system reduces connect and disconnect time by up to 60%
• Durable nitrile rubber energy absorber cover designed to last 4 times longer than previous version
• Reduced energy absorber size is more user friendly and convenient compared to previous version
• 19 mm (3/4") Dyneema® fibre and polyester web lifeline
• AAF (Average Arrest Force) 400 daN & MAF (Maximum Arrest Force) 600 daN
• Equipped with 3M™ Connected Safety ID (CSID), a pre-programed RFID tag that makes it easier to track and manage equipment using the 3M™ Inspection and Asset Management System (system available by subscription)
• Weight capacity: Single User - 140 KG

EN360:2002

3M™ DBI-SALA® Nano-Lok™ Personal Self Retracting Lifeline, 3101298 is made from 19 mm (3/4") Dyneema® fibre and polyester web. Our 1.8 m twin-leg lifeline has aluminium rebar hook ends, a quick connector for harness mounting and a smart-activating brake system.

• Extremely compact and lightweight twin-leg personal self-retracting lifeline designed for working at height
• Smart activating brake system provides fall clearance as low as 1.2 m (4 ft.) - up to 4 m (13 ft.) less than lanyards
• Lightweight speed connect system reduces connect and disconnect time by up to 60%
• Durable nitrile rubber energy absorber cover designed to last 4 times longer than previous version
• Reduced energy absorber size is more user friendly and convenient compared to previous version
• 19 mm (3/4") Dyneema® fibre and polyester web lifeline
• AAF (Average Arrest Force) 400 daN & MAF (Maximum Arrest Force) 600 daN
• Equipped with 3M™ Connected Safety ID (CSID), a pre-programed RFID tag that makes it easier to track and manage equipment using the 3M™ Inspection and Asset Management System (system available by subscription)
• Weight capacity: Single User - 140 KG

EN360:2002

Our 3M™ Protecta® rope connecting lanyards are an ideal solution for the connecting element in a restraint system. Made from polyamide braided rope with safety stitching. Rope diameter 10.5mm.

• Use a 3M™ Protecta® Rope Restraint Lanyard as part of a restraint system to prevent the user from moving into an area where they may be exposed to a fall
• Sewn terminations with heat shrink tube protection provide greater durability and long product service life
• Single Leg
• Anchor connection type: Loops with Thimbles
• Harness connection type: Loops with Thimbles
• Length: 1.00 m

EN354:2010
EN365:2004

Our 3M™ Protecta® rope connecting lanyards are an ideal solution for the connecting element in a restraint system. Made from polyamide braided rope with safety stitching. Rope diameter 10.5mm.

• Use a 3M™ Protecta® Rope Restraint Lanyard as part of a restraint system to prevent the user from moving into an area where they may be exposed to a fall
• Sewn terminations with heat shrink tube protection provide greater durability and long product service life
• Single Leg
• Anchor connection type: Snap Hook
• Harness connection type: Snap Hook
• Length: 2.00 m

EN354:2010
EN365:2004

Our 3M™ Protecta® rope connecting lanyards are an ideal solution for the connecting element in a restraint system. Made from polyamide braided rope with safety stitching. Rope diameter 10.5mm.

• Use a 3M™ Protecta® Rope Restraint Lanyard as part of a restraint system to prevent the user from moving into an area where they may be exposed to a fall
• Sewn terminations with heat shrink tube protection provide greater durability and long product service life
• Twin Leg (Y-Type)
• Anchor connection type: Snap Hook
• Harness connection type: Snap Hook
• Length: 1.30 m

EN354:2010
EN365:2004

• Durable 1680D shock absorbing poly webbing
• Aluminium alloy carabiner with captive eye
• Treaded loop end that grips the tool when attached
• Low-profile lightweight design reduces snag hazards

• Size: Standard 35"- 42" (89 -110cm)

• Elastic maintains snug fit
• Pull-on design provides easy on/off
• One size fits all
• Stainless steel (#304) carabiner
• Tuck-away pocket to keep connector when not in use

• Polyester webbing cuff secures to wrist
• Energy-absorbing ribbed pull cord
• Adjustable barrel lock for tool attachment
• Short length improves the drop clearance needed
• Wrist Measurement S/M 5" - 7" (13cm - 18cm)
• Wrist Measurement L/XL 7" - 8½" (18cm - 22cm)

• Constructed with PU covered aircraft cable
• Stainless steel carabiners (#304)
• Coil design prevents snag and tangle hazards
• Swivelling design prevents tangles and fast recoil
• Extended length 50" (127cm)
• Maximum safe working capacity: 5lbs (2.26kg)

• Constructed with PU covered aircraft cable
• Stainless steel carabiners (#304)
• Coil design prevents snag and tangle hazards
• Swivelling design prevents tangles and fast recoil
• Extended length 50" (127cm)
• Maximum safe working capacity: 2lbs (0.9kg)

• Comfortable high-stretch elastic material
• Easily attaches to hard hats and other headwear
• Quick connect clamp attaches securely to fabric

Fall Arrester
• Retractable fall arrest with 50mm webbing.
• Maximum length: 2.5 meters
• Incorporating a protective casing and Energy Absorber (45mm)
• Minimum breaking strength >15kN
• Conforms to EN360:2002

Energy absorbing lanyard with Scaff Hook.
• Length - 1.5 meters.
• 44mm wide polyester webbing which reduces the impact of fall to less than 6kN.
• Loops protected by an abrasion resistant tubular webbing.
• Conforms to EN355:2002 and tested per VG11 of PPE Directive 89/686/EEC.

SHOCK ABSORBING WEBBING LANYARD
• 1.8 mtr (Model: FA 30 304 18)
• 30mm wide webbing lanyard
• 35mm webbing shock absorber
• Karabiner at one end and scaffold hook at the other end
• Loops protected by abrasion resistant tubular webbing

Conforms to EN 355:2002 and tested as per VG 11
of PPE Directive 89/686/EEC

• 44mm wide elastic webbing
• 35mm wide shock absorber
• Karabiner at one end and scaffold hook at the other
• Loops protected by an abrasion resistant tubular webbing
• Energy absorber in 35 mm wide webbing which reduces the impact of the fall less than 6 kN
• 44 mm wide polyester expandable elasticated webbing lanyard
• Expanded length : 1.5 m , Relaxed length : 1 m

• 12mm Kernmantle rope with snap hook at one end and scaffold hook at the other end
• Loops protected by abrasion resistant thimbles
• Stitching protected by strong transparent sleeve
• Minimum breaking strength 22 kN
• Conforms to: EN 355

• Work Positioning Webbing Lanyard with Ring Adjuster
• Loops protected by an abrasion resistant tubular webbing
• Steel Karabiner at one end and steel snap hook at the other end
• Made up of 30mm diam polyester webbing
• Length 2.00 metres maximum
• Webbing: - Polyester
• Connector - Steel
• Ring Adjuster - Forged Alloy Steel
• Conforms to: EN 358:1999

A fall restraint lanyard connection is used between the anchor point and the body harness to prevent the user from reaching the fall area and work positioning applications. MSA restraint lanyards are available in web and kernmantel rope.

• The loops at the ends are protected by an abrasion resistant covering Prevents the webbing from being damaged by the metallic contact of the connector
• 30mm Polyester Webbing
• Galvanized alloy steel screwgate carabiner
• The screwgate carabiner has a minimum breaking strength of 25 kN with a gate opening of 18mm
• Conforms to EN 354:2010 Personal fall protection equipment. Lanyards

The MSA lanyards are available in web and kernmantel rope configurations with a variety of connectors. Energy-absorbing lanyards provide a means of connection between the fall arrest attachment of MSA full body harnesses and a qualified anchorage pont. The energy absorber keeps fall arrest forces below 6 kN.

• Single leg configuration, twin-leg versions also available
• The Loops at the end are protected by an abrasion resistant covering to prevent the webbing from being damaged by the metallic contact of the connector
• Curved design of the scaffold hook gate allowing a more comfortable grip
• 30 mm polyester webbing
• Galvanized alloy steel screwgate carabiner
• The screwgate carabiner has a minimum breaking strength of 25Kn with a gate opening of 18mm
• Galvanized alloy steel scaffolding hook
• The scaffolding hook has a minimum breaking strength of 23 kN with a gate opening of 50.8mm
• Maximum arrest force of 6Kn
• The screwgate carabiner has a minimum breaking strength of 25Kn with a gate opening of 18mm

The MSA lanyards are available in web and kernmantel rope configurations with a variety of connectors. Energy-absorbing lanyards provide a means of connection between the fall arrest attachment of MSA full body harnesses and a qualified anchorage point. The energy absorber keeps fall arrest forces below 6 kN.

• Twin leg configuration
• The loops at the ends are protected by an abrasion resistant covering Prevents the webbing from being damaged by the metallic contact of the connector
• curved design of the gate of the scaffold hook Allows more comfortable grip
• 30mm Polyester webbing
• Galvanised alloy steel screw gate karabiner and scaffolding hook

The Scaffolding hook has a minimum breaking strength: 23 kN, Gate opening: 50.8 mm
The Screw gate Karabiner has a minimum breaking strength: 25 kN, Gate opening: 18 mm

• 35mm width Nylon tear webbing shock absorber

Conforms to EN 355:2002 Personal protective equipment against falls from a height. Energy absorbers

The MSA lanyards are available in web and kernmantel rope configurations with a variety of connectors. Energy-absorbing lanyards provide a means of connection between the fall arrest attachment of MSA full body harnesses and a qualified anchorage pont. The energy absorber keeps fall arrest forces below 6 kN.

• Single leg configuration, twin-leg options also available
• Leading edge approved for use in leading edge application
• Cross stich and a strong transparent covering sleeve to protect the ends and makes the stitches visible for easy inspection
• Abrasion resistant thimble at the end of the loops to prevent the rope from being damaged by the metallic contact of the connector
• A colour tracer strand that loses it colour in due course of time showing that the lanyard is now unfit for further use
• 11mm Nylon Kernmantel rope
• Galvanized alloy steel twist-lock carabiner
• The Carabiner has a minimum breaking strength of 23kN with a gate opening of 60mm
• Aluminum Alloy Scaffolding hook
• The Scaffolding hook has a minimum breaking strength of 23 kN with a gate opening of 16 mm
• Maximum arrest force of 6kN
• Conforms to EN 352:2002 Personal protective equipment against falls from a height. Energy absorbers

The V-TEC 1.8M Mini retractable lanyard is the most compact & lightweight self-retracting lanyard ever developed using multiple spring radial energy-absorbing technology. This new design eliminates the need for an external energy-absorber outside of the housing making it the smallest personal fall limiter on the market.
• Integral energy absorber
• Requires zero recalibration or adjustment
• The energy absorber is completely sealed from external contaminants
• A fully rotating attachment point for complete flexibility –both 360° and 180° providing a free range of motion
• Structurally reinforced pawl mechanism through precision engineering
• Highly durable polycarbonate case houses the SRL, and its transparency allows for easy visual inspection of critical internal components
• High quality components manufactured from high-grade stainless steel and engineered plastics
• Single Leg
• Aluminium rebar lightweight hook anchorage point
• 60-140KG including tool weight limit
• EN360:2002 Personal protective equipment against falls from a height. Retractable type fall arresters

The V-TEC PFL (Personal Fall Limiter) Retractable Lanyard is the most compact & lightweight self-retracting lanyard ever developed in its class using multiple spring radial energy-absorbing technology. This new design eliminates the need for an external energy-absorber outside of the housing making it the smallest personal fall limiter on the market.
Suitable for multiple applications, the 3 meter PFL is designed specifically for environments where close anchorage is available. The product offers fall arrest and restraint for users 60 to 140 kg including tools.

• Integral energy absorber
• Requires zero recalibration or adjustment
• The energy absorber is completely sealed from external contaminants
• A fully rotating attachment point for complete flexibility –both 360° and 180° providing a free range of motion
• Structurally reinforced pawl mechanism through precision engineering
• Highly durable polycarbonate case houses the SRL, and its transparency allows for easy visual inspection of critical internal components
• High quality components manufactured from high-grade stainless steel and engineered plastics
• Single Leg
• Aluminium rebar lightweight hook anchorage point
• Aluminium carabiner triple locking (TL) captive pin
• EN360:2002 Personal protective equipment against falls from a height. Retractable type fall arresters