ARC Flash — Boilersuits

• Fire Retardant, Hi Vis, Anti-static, ARC Flash Orange Coverall
• RIS-3279-TOM issue 1 for use on or around railway lines
• 300gsm 60% Modacrylic ,40% Cotton
• 2 hip pockets
• Large bellows pocket to each leg with hook and loop closure flap
• Right leg mobile phone pocket with hook and loop closure flap
• All pocket flaps with Retro-reflective tape feature.
• Internal knee pad pouches
• Large qualifying icons on left leg pocket
• Mandarin collar

• EN ISO 13688:2013 - General requirements for protective clothing
• EN ISO 20471:2013 Class 3 - Test method for high visibility – RIS-3279-TOM Issue 1
• EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
• EN 1149-5:2008 - Anti Static - Material performance and design requirements
• EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
• EN ISO 11612:2015 (A1 A2 B1 C1) - Protection against heat and flame

ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (EBT50 = 9.3 Cal/cm2) - Open Arc testing

• Fire Retardant, Hi Vis, Anti-static, ARC Flash Orange Coverall.
• GO/RT 3279 issue 8 2013 for use on or around railway lines.
• 310gsm 40% Modacrylic 24% Viscose, 20% Polyester, 10% Cotton, 4% Aramid, 2% Anti-static Fibre.
• 2 hip pockets.
• Large bellows pocket to each leg with hook and loop closure flap.
• Right leg mobile phone pocket with hook and loop closure flap.
• All pocket flaps with Retro-reflective tape feature.
• Internal knee pad pouches.
• Large qualifying icons on left leg pocket.
• Adjustable leg bellows.

• EN ISO 13688:2013 - General requirements for protective clothing
• EN ISO 20471:2013 Class 3 - Test method for high visibility - GORT 3279 Issue 8
• EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
• EN 1149-5:2008 - Anti Static - Material performance and design requirements
• EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
• EN ISO 11612:2015 (A1 A2 B1 C1) - Protection against heat and flame

ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (ATPV = 16 Cal/cm2) - Open Arc testing

• Fire retardant, Anti-static, ARC Flash coverall.
• 300gsm 60/40 Modacrylic/cotton blend.
• Triple stitch construction.
• 2 hip pockets.
• Rear patch pocket with hook and loop closure flap.
• Large bellows pocket to each leg with hook and loop closure flap.
• Right leg mobile phone pocket with hook and loop closure flap.
• All pocket flaps with Retro-reflective tape feature.
• Internal knee pad pouches.
• Large qualifying icons on left leg pocket.

EN ISO 13688:2013 - General requirements for protective clothing
EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
EN 1149-5:2008 - Anti Static - Material performance and design requirements
EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
EN ISO 11612:2015 (A1 A2 B1 C1) - Protection against heat and flame

ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (ATPV = 10.8 Cal/cm2) - Open Arc testing

• Does NOT conform to EN ISO 20471

• Fire Retardant, Hi Vis, Anti-static, ARC Flash coverall.
• 300gsm 60/40 Modacrylic/cotton blend.
• Inherently flame retardant.
• Fire Retardant properties will not diminish with repeated laundering.
• Triple stitch construction.
• 2 hip pockets.
• Large bellows pocket to each leg with hook and loop closure flap.
• Right leg mobile phone pocket with hook and loop closure flap.
• All pocket flaps with Retro-reflective tape feature.
• Internal knee pad pouches.
• Large qualifying icons on left leg pocket.

• EN ISO 13688:2013 - General requirements for protective clothing
• EN ISO 20471:2013 Class 3 - Test method for high visibility
• EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
• EN 1149-5:2008 - Anti Static - Material performance and design requirements
• EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
• EN ISO 11612:2015 (A1 A2 B1 C1) - Protection against heat and flame

ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (ATPV = 10.8 Cal/cm2) - Open Arc testing

• Fire Retardant, Hi Vis, Anti-static, ARC Flash coverall.
• 300gsm 60/40 Modacrylic/cotton blend.
• Inherently flame retardant.
• Fire Retardant properties will not diminish with repeated laundering.
• Triple stitch construction.
• 2 hip pockets.
• Large bellows pocket to each leg with hook and loop closure flap.
• Right leg mobile phone pocket with hook and loop closure flap.
• All pocket flaps with Retro-reflective tape feature.
• Internal knee pad pouches.
• Large qualifying icons on left leg pocket.

• EN ISO 13688:2013 - General requirements for protective clothing
• EN ISO 20471:2013 Class 3 - Test method for high visibility
• EN 1149-5:2018 - Anti Static - Material performance and design requirements
• EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
• EN ISO 11612:2015 (A1 A2 B1 C1 F1) - Protection against heat and flame

ARC FLASH
EN 61482-2:2020 - Performance requirements and design requirements
(ELIM = 14 Cal/cm2)
(ATPV = 17 Cal/cm2)