Gloves — Nitrile
• Knitted nylon/lycra glove
• Nitrile/water based PU palm and finger coating.
• Breathable, Soft and tactile finish
• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 3 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• 35% polyester + 65% NItrile
• 100% Polyester shell with nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and light engineering.
• Ideal for dry or slightly oily applications.
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• 35% polyester + 65% Nitrile
• Nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• 20% polyester + 80% Nitrile
• Heavy duty nitrile fully dipped fingers and palm
• Lightweight for maximum dexterity
• The extended dipping process produces a uniformly thick coverage of nitrile; ideal for the most demanding of applications
• Liquid proof.
• Provides wearer with a combination of durability and comfort
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• 100% Nylon seamless shell with nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and light engineering.
• Ideal for dry or slightly oily applications.
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Unsupported nitrile glove.
• Overall Length 45cm
• A high level of resistance to abrasion, solvents and animal fats.
• Pebble finish to palm
• Silicon and wax free
• EN ISO 374-1: 2016: Type B
Chemical - Breakthrough Time
Methanol (A) - More than 60 Mins (Level 3)
Toluene (F) - More than 10 Mins (Level 1)
n-Heptane (J) - More than 480 Mins (Level 6)
Sulphuric Acid 96% (L) - More than 240 Mins (Level 5)
Sodium Hydroxide 40% (K) - More than 480 Mins (Level 6)
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 0 - Tear Resistance
• Level 2 - Puncture
• Level X - ISO 13997 Blade Cut
• EN ISO 374-5:2016
Protection Against Bacteria and Fungi - Pass
Protection Against Viruses - Not Tested
• Nitrile glove
• Flocklined
• Overall length 31.5cm
• A high level of resistance to abrasion, solvents and animal fats.
• Embossed pattern to palm
• Silicon and wax free
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level X - Tear Resistance
• Level 1 - Puncture
• Level X - ISO 13997 Cut Resistance
• EN374-3:2016
n-Heptane (J) - More than 480 Mins (Level 6)
Sodium Hydroxide 40% (K) - More than 480 Mins (Level 6)
Sulphuric Acid 96% (L) - More than 60 Mins (Level 3)
• 100% Nylon seamless shell.
• Nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications
• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Our pairs of nitrile powder free gloves are a popular choice when looking to replenish items from within a first aid kit.
• They are individually packed in a sealable bag and are compact allowing them to fit in virtually any size of first aid bag or box.
• Nitrile Powder Free Examination gloves are an ideal alternative to our latex range and are ideal for anyone with a Type 1 allergy.
• Our Nitrile gloves contain no natural latex proteins yet have the same wall thickness as a latex glove due its greater perforation resistance.
• Up to three times more puncture resistant than other synthetic gloves
• Click Medical Nitrile Gloves have high resistance to a wide range of chemicals, especially to hydrocarbons, oils and fats
• The distinctive blue colour means they are easily distinguishable from other types of gloves and they are commonly used in hospitals, the nursing sector, medical practitioners in surgeries and the dental sector.
• Supplied in a pack of 10 pairs
• HPPE 49%, Polyester 25%, Glass Fibre 12%, Steel 8%, Spandex 6% Liner.
• 100% Nitrile Rubber Coating
• 100% PVC TPR Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass fibre 21.3%, Spandex 7.8% Liner.
• 100% Nitrile Rubber Coating.
• 100% PVC TPR back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• Para-Aramid 71.2%, Steel 13.5%, Polyester 10.5%, Spandex 8% Liner.
• 100% Nitrile rubber coating.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 1 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• Nitrile Foam coating
• 15 Gauge - Nylon and Polyester
• Comfortable and breathable for prolonged periods when performing precision tasks
• EN 388: 2016
• Level 4 - Abrasion
• Level X - Cut resistance
• Level 3 - Tear resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• 13 Gauge, HPPE, Polyester, Glass Fibre Green Liner.
• 100% Sandy Nitrile Coating
• 100% TPR Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level C - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
• 13 Gauge, HPPE, Polyester, Glass Fibre Orange Liner.
• 100% Sandy Nitrile Coating
• 100% TPR Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level C - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
• 13 Gauge, HPPE, Polyester, Glass Fibre Green Liner.
• 100% Foam Nitrile Coating
• 100% TPR Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
• 13 Gauge Orange Liner.
• 45% UHMW PE + 30% nitrile + 25% rubber
• 100% Foam Nitrile Coating
• 100% TPR Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
• 13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
• 100% Foam Nitrile Coating
• 100% TPR Glow in the Dark Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
• 13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
• 100% Foam Nitrile Coating
• 100% TPR Glow in the Dark Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
• 13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
• 100% Foam Nitrile Coating
• 100% TPR Glow in the Dark Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
)
• Sizes S-XL comes in boxes of 100 pieces.
• Size XXL comes in boxes of 90 pieces.
• Powder Free black textured Nitrile Gloves
• CE category III
• Excellent elasticity
• Textured for added grip
• 7 mil
• EN420: 2003 +A1:2009
• EN 388:2016+A1:2018
• Level 0 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 0 - Tear Resistance
• Level 0 - Puncture Resistance
• Level A - TDM Cut Resistance (ISO 13997)
• EN 374-1:2016
• EN 374-4: 2013
• EN 374-5: 2016
Chemical - Breakthrough Time
n-Heptane(J) - More than 30 Mins (level 2).
Sodium Hydroxide 40%(K) - More than 480 Mins (level 6).
Additional Chemical Test
Ammonia 25% - More than 10 Mins (level 1).
Formaldehyde 37%- More than 480 Mins (level 6).
Hydrogen Peroxide 30% - More than 480 Mins (level 6).
• Double coated nitrile offers water and oil resistance
• Wet/dry grip
• Washable and can be tumble dried (Follow instructions)
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance
• EN 511: 2006
• Level X - Convective Cold
• Level 2 - Contact Cold
• Level X - Water Penetration
Grey - Palm coated foam nitrile with a seamless knitted liner
• The original nitrile foam glove
• Highly versatile solution for precision assembly and general handling
• Perfect balance between comfort, dexterity and protection
• Advanced Knitting Technology to increase stretch and flexibility in high-stress areas
EN388
3.1.3.1
Antistatic according to EN1149
• Bare-hand -like comfort and tactility with high durability
• Ultra-thin Nitrile Foam FORTIX coating lasts up to x3 longer than comparable coatings
• 20% more breathable coating than earlier formulation, for cooler and drier hands
• Seamless 18-gauge nylon-spandex liner has a bare-hand feel, offering breathability, comfort and enhanced fingertip sensitivity for precision tasks
• Silicone free material: for no transfer of silicone containments to metal parts prior to painting
• Ideal solution for workers doing general handling or assembling tasks
