Site content and images copyright to Beeswift Limited 2013.
Billswift trademarked & copyright protected 2005.

Gloves — Cut Resistant

Anti-Vibration
Chemical
Cut Resistant
Disposable
Freezer
Heat Resistant
Knitted
Latex
Leather
Mechanics
Nitrile
Nylon Fibre
Polyurethane
Puncture
PVC
Welders Gauntlets
Rigger
Kevlar Fingerless Dotted Glove
Product Code: KFLGMWD

• 90% reinforced fiber + 10% PVC
• Medium weight fingerless latex dotted glove.
• Extra density blended yarn.
• Offers exceptional cut protection.
• Good dexterity and comfort to the user.
• Ideal to handle both large and small hazardous components.
• Dotted both sides.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance
Kevlar Lightweight Glove
Product Code: KGLW

• 100% reinforced fiber
• Lightweight cut resistant glove.
• Exceptional dexterity for safe handling of the smallest components.
• Extremely successful used as a glove liner in conjunction with traditional
work gloves.
• Used this way it can provide additional protection should the outer glove
incur laceration.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level A - ISO 13997 Cut Resistance
Kevlar Mediumweight Gloves
Product Code: KGMW

• 100% reinforced fiber
• Medium weight glove.
• Extra density yarn.
• High level cut protection without the loss of dexterity
• Comfortable for the wearer.
• Ideal where there is a requirement to handle both large and small
hazardous components.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance
Kevlar Mediumweight Dotted Glove
Product Code: KGMWD

• 90% reinforced fiber + 10% PVC
• Medium weight glove.
• Extra density yarn.
• High level cut protection without the loss of dexterity
• Comfortable for the wearer.
• Ideal where there is a requirement to handle both large and small
hazardous components.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance
Kevlar Latex Gloves Full Cuff Blue
Product Code: KLGFC

• 20% reinforced fiber + 80% Latex
• Reinforced knitted glove fully latex coated.
• Excellent all-round protection.
• High cut resistance.
• Offers excellent grip.

• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level D - ISO 13997 Cut Resistance
Kevlar Latex Gloves Large
Product Code: KLG

• 40% reinforced fiber + 60% Latex
• Reinforced knitted glove latex coated palm
• High cut resistancy.
• Comfortable, allows hand to breathe through back.
• Excellent grip.

• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level D - ISO 13997 Cut Resistance
Kutstop Micro Foam Nitrile Amber Cut Level 3 Amber
Product Code: KS13

• Cut B amber cut protection
• 13g HPPE plus nylon liner
• Black nitrile coated palm
• Excellent dexterity and comfort
• Construction industry, automotive industry, electrical industry and handling materials with sharp edges

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 2 - Puncture
• Level B - ISO 13997 Cut Resistance
Kevlar 14 Inch Sleeve With Thumbslot
Product Code: KS14

• 14" (35cm) Reinforced sleeve with thumb slot.
• 100% reinforced fiber
• Excellent cut resistance.
• Soft and comfortable against the arm during use.
• Extremely lightweight elasticated style allows the sleeve to
remain in place during the most rigorous tasks.
•Thumb slot is added to further ensure that the product remains
in place.
• Ideal in industries where laceration risks to the arms are prominent.
• Sold as singles.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance
Kutstop Micro Foam Nitrile Green Cut Level 5 Green
Product Code: KS15

• Kutstop system
• 15g HPPE plus glass fibre and spandex liner
• Black nitrile coated palm
• Excellent dexterity and comfort
• Ideal for the construction industry, automotive industry, electrical industry and handling glass or sheet metal

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level C - ISO 13997 Cut Resistance
Kevlar 18 Inch Sleeve With Thumbslot
Product Code: KS18

• 18" (45cm) Reinforced sleeve with thumb slot.
• 100% reinforced fiber
• Excellent cut resistance.
• Soft and comfortable against the arm during use.
• Extremely lightweight elasticated style allows the sleeve to
remain in place during the most rigorous tasks.
•Thumb slot is added to further ensure that the product remains
in place.
• Ideal in industries where laceration risks to the arms are prominent.
• Sold as singles.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance
Micro Foam Nitrile Cut 3 Lge Black
Product Code: KS3

• Cut resistant Nylon/Spandex glove.
• Nitrile micro foam palm coating.
• Dexterity with comfort.

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 3 - Puncture
• Level B - ISO 13997 Cut Resistance
Micro Foam Nitrile Cut 5 Lge Black
Product Code: KS5

• High cut resistance.
• Nitrile micro foam palm coating.
• Dexterity with comfort.

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 2 - Puncture
• Level D - ISO 13997 Cut Resistance
Pu Coated Cut 5 Glove Black
Product Code: KSPU5

• 65% UHMWPE(Ultra high molecular weight polyethylene) + 35%PU
• 13 Gauge Seamless liner.
• PU coating, palm coated.
• High quality cut resistance.
• Excellent dexterity.

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level 3 - Puncture
• Level C - ISO 13997 Cut Resistance
Glovezilla Cut Resistant Food Safe Glove Blue Blue
Product Code: GZ10B

• HPPE 47.4%, Polyester 20.1%, Glass Fibre 17.2%, Steel 14%, Spandex 1.3%.
• Food Safe and washable.
• Extremely high cut protection.
• Suitable for general food preparation and areas where high cut protection is needed.

• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level F - TDM Cut Resistance (ISO 13997)
Glovezilla Para-aramid Sleeve With Thumb Holes 12" Yellow
Product Code: GZ13Y12TH

• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)
Glovezilla Para-aramid Sleeve 10" Yellow
Product Code: GZ14Y10

• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)
Glovezilla Para-aramid Sleeve 18" Yellow
Product Code: GZ15Y18

• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)
Glovezilla Para-aramid Sleeve With Thumb Holes 22" Yellow
Product Code: GZ16Y22TH

• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)
Glovezilla Thermal Leather Glove Brown Brown
Product Code: GZ50BR

• Premium Cowhide Split Leather
• G-150gram Thinsulate and Micro Fleece
• Nylon Cuff

• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 3 - Tear Resistance
• Level 4 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN 511:2006
• Level 1 - Convective Cold Resistance
• Level 3 - Contact Cold Resistance
• Level X - Water Penetration
Cut Resistant Fully Coated Impact Glove Orange Orange
Product Code: GZ61OR

• 13 Gauge Liner.
• 20% UHMW PE+ 80% rubber
• 100% TPE Fully Injection coating.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level C - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
Cut Resistant Fully Coated Impact Glove Green Green
Product Code: GZ62G

• 13 Gauge Liner.
• 20% UHMW PE+ 80% rubber
• 100% TPE Fully Injection coating.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
Glovezilla Cut Resistant Rigger Glove White White
Product Code: GZ70W

• Premium Grey split leather.
• Heavyweight cotton backing and safety cuff.
• Para-Aramid lining.

• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 4 - Puncture Resistance
• Level E - TDM Cut Resistance (ISO 13997)

Glovezilla Cut Resistant Drivers Glove White White
Product Code: GZ71W

• Premium soft grain Leather.
• Natural Coloured backing.
• Half elastication to back of cuff.
• Para-Aramid lining.

• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 4 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)

Glovezilla Arc Flash Terminal Drivers Glove Brown Brown
Product Code: GZ83BR

• Premium goatskin Leather with reinforced stitching
• Reinforced Para-aramid Lining
• Thinsulate lined layer
• ARC Flash resistant ASTM F2675/F2675M 56cal/cm2
• ARC Flash Heat attenuation factor 95.7%

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)

• EN 407:2004
• Level 4 - Burning Behaviour
• Level 1 - Contact Heat
• Level 3 - Convective heat
• Level 2 - Radiant heat
• Level X - Small splashes of Molten Metal
• Level X - Large splashes of Molten Metal

• EN 511:2006
• Level X - Convective Cold Resistance
• Level 3 - Contact Cold Resistance
• Level X - Water Penetration